Vacuum Chamber for degassing Resin & Silicone
Vacuum Chamber (9.55L, 2.5 Gallon) and Single Stage 3.8CFM Vacuum Pump for degassing Resin and removing airbubbles from Resin Casts.
- 9.55 Litre Vacuum Chamber Kit with 3.8 CFM Single Stage Vacuum Pump HVAC
- Chamber Size: Diameter:10''/26cm, Height:7''/18cm (9.55L Vacuum Chamber); Chamber Kit Include: Aluminium Base/Chamber; 20mm thicj Acrylic Lid, Silicone Gasket; Vacuum Gauge; Air Manifold With Valves; 90cm Hose
- Vacuum Pump Voltage: 220V/240v 50HZ; Power: 1/3 HP; Single Stage 3 CFM (85L/Min)
- Heavy Duty Sealavac, one piece, Silicone Seal
- Complete Instruction Manual
To remove air bubbles, place your slow cure mixed resin in the degassing chamber at
To remove them they would have to put the smooth cast in a degassing chamber to remove the air or cast them in a pressure pot.
If you cast them in a pressure chamber , your mould would have to have been cast under pressure too, so you don’t get distortion in your mould.
